- Preloaded spindle bearings assembled with fine craftsmanship to ensure precision cutting performance.
- Inserted alloy steel table is carbonized and hard chrome plated for dependable wear resistance and rigidity for years of operations.
- Additional feed rollers make feeding problem stock easy.
- A specially designed gear box provides high torque output accurate transmission and a long service life.
- COMPREHENSIVE SAFETY FEATURES: - Circuit will break if the cutterhead is touched. - The cell sensor detects elevation of the entire feeding mechanism. - The end switch allows for convenient machine running tests.
- Anti-rust treatment for the machine frame.
- FLOATING ROLLERS.
The pneumatically controlled universal joint under table creates a floating effect, for outstanding smoothness during stock feed. Choice of 4 or 5 floating rollers. - INSERTED ALLOY STEEL TABLE
Eliminating the conventional hard chrome plated table, POM moulders are designed with an inserted table, carbonized and hard chrome treated for dependable maximum wear resistance. - MECHANICAL DIGITAL READOUT
Each spindle is available to be fitted with a mechanical digital readout for accurate spindle setting.
- FULL GROOVE TABLE (Optional)
Fitted between the 1st spindle and the initial spindle on the rear bottom spindle set. - UNIVERSAL SPINDLE (Optional)
The universal spindle can be swivelled 240° for moulding operations. - FEED MAGAZINE (Optional)
This feed magazine enables continuous automatic stock feed that greatly increases efficiently. - FULLY ENCLOSED SPLASH GUARD (Optional)
The guard not only provides maximum safety protection for the operator, but also reduces noise to a minimum during cutting operations.
U: Floating table roller
C: Inserted alloy steel table
D: Mechanical Digital readout
V: Fully enclosed splash guard
X: Horizontal spindle support
H: Universal spindle
S: Short stock feed roller
G: Full groove table
F: Feed magazine
T: Tilting feed roller
I: Frequency inverter
MODEL | SHG-806U.C.D |
Maximum width of cut | 200mm |
Maximum height of cut | 125mm |
Horziontal top spindle motor | 7.5HP,10HP |
Horziontal bottom spindle motor | 7.5HP,10HP |
Right vertical spindle motor | 7.5HP |
Left vertical spindle motor | 7.5HP |
Feed drive motor | 7.5HP |
Elevation motor | 1HP |
Spindle speed | 6000R.P.M. |
Feed speed | 4.5-26M/min,4.5~30M/min (inverter) |
Spindle diameter | 40mm |
Standard cutter diameter | 125mm |
Maxi 1st bottom spindle diameter | 155mm |
Maxi Right vert. spindle diameter | 180mm |
Maxi Left vert. spindle diameter | 180mm |
Maxi Horz. top spindle diameter | 180mm |
Maxi Rear bottom spindle diameter | 180mm |
Net weight | 4200kgs |
Gross weight | 4800kgs |
Packing dimensions | 5105x1780x1830mm |
Universal spindle (Option) | 10HP,7.5HP |
Multiple rip saw (Option) | 20HP, 25HP, 30HP |