Edge Banding Series from OAV
These machines are one-piece constructed and inner functions/components may be interchanged depending on customer requirements. The heavy-duty roller chain supports workpiece feeding and the design is similar to European machines thereby ensuring a long service life. The upper, wide v-belt system also ensures increased workpiece operational stability. This system is motor-controlled for easier upward/down-ward motion adjustment.
Two upper knobs for easy adjustment.
MODEL | EB-73P | EB-74P | EB-73 | EB-74 | EB-75 | EB-77 |
Machine frame length | 3.5 Meter | 5 Meter | 7 Meter | 8 Meter | ||
Working speed | 10 M/min. | 6-25 M/min. | 6-20 M/min. | |||
Pressure beam type | Rubber roller type | V-belt type | ||||
Conveyor motor | 2 HP | 3 HP | 5 HP | |||
Pre-mill unit 90mm PM01 | ||||||
End trimming unit 1000mm ET02 | ||||||
End trimming unit 550mm ET03 | ||||||
Radius trimming unit 400mm RT01 | ||||||
Fine trimming unit 450mm FT02 | ||||||
Radius trimming unit 450mm FT03 | ||||||
Corner profile unit 1500mm CP04 | ||||||
Profile scraping unit 450mm PS02 | ||||||
Profile scraping unit 350mm PS03 | ||||||
Flat scraping unit 400mm FS04 | ||||||
Grooving saw unit 400mm GS01 | ||||||
Flat snading unit 400mm FS01 | ||||||
Buffing clean unit 350mm BC01 | ||||||
Free space for additional units | 350mm | 520mm | 450mm | 450mm | ||
Tape PVC 0.4~0.5 mm | ||||||
Tape ABS 1.0~3.0 mm | ||||||
Power KW | 7.5 | 7.5 | 11 | 11 | 15 | 18 |
Panel thickness | 10-40 mm | 10-55 mm | ||||
Minimum working length | 150mm | 100mm | ||||
Minimum working width | 50mm | 50mm | 60mm | |||
Compressed air required | 5 ~ 6 kg/ cm2 | 5 ~ 6 kg/ cm2 | ||||
Machine weight | 2,000Kg | 2,100Kg | 2,900Kg | 3,000Kg | 3,800Kg | 4,200Kg |
Gross weight | 2,400Kg | 2,500Kg | 3,300Kg | 3,350Kg | 4,300Kg | 4,700Kg |
Packing sizes(LxWxH) | 380x105x175 cm | 570x105x175 cm | 770x105x175 cm | 870x105x175 cm | ||
Overall sizes(LxWxH) | 980x180x195 cm | 600x180x195 cm | 800x180x195 cm | 900x180x195 cm |
MODEL | CP1 | R2 | FA | |
Panel thickness | mm | 9 - 60 | ||
Panel width min. | mm | 100 | ||
Edge thickness | mm | 0.4 - 5 | 0.4 - 3 | |
Inside radius min | mm | 10 | 20 | |
Feed speed | m/min | 9/ 15 / 22 | ||
Power | kg | 1 | 2 | 3 |
Pneumatic pressure | bar | 6 | ||
Packing size (LxWxH) | cm | 110x100x145 cm | 138x115x155 cm | |
Machine weight | kg | 250 | 550 |
MODEL | PFA | RS | RA60 | |
Panel thickness | mm | 9 - 60 | ||
Panel width min. | mm | 90 | ||
Edge thickness | mm | 0.4 - 3 | ||
Inside radius min | mm | 20 | ||
Feed speed | m/min | 4/ 7/ 11 | 9/ 15 / 22 | |
Power | kg | 5 | 3 | |
Pneumatic pressure | bar | 6 | ||
Packing size (LxWxH) | cm | 138x115x155 cm | 110x107x115 cm | |
Machine weight | kg | 600 | 400 |
MODEL | RAS | RAC | RA100 | |
Panel thickness | mm | 9 - 60 | 9 - 100 | |
Panel width min. | mm | |||
Edge thickness | mm | 0.4 - 3 | ||
Inside radius min | mm | 20 | ||
Feed speed | m/min | 4~25 | 6/ 9/ 14 | |
Power | kg | 3 | 4 | |
Pneumatic pressure | bar | 6 | ||
Packing size (LxWxH) | cm | 110x107x115 cm | 110x107x160 cm | |
Machine weight | kg | 400 | 500 |