DESCRIPTION
?Better performance than conventional lathes
?3-step speeds, each in variable speed change.
?Speed change by auto shifting.
?More convenient turning processing control & spindle speed shown on rpm meter.
?Braking controlled by quick inverter stop.
?Through cross feeding at fixed spindle speed, you′ll get the fine accuracy & speed for slide face of round plate (similar to CSS function).
?Through cross feeding for step turning, the spindle speed change can match and achieve rapid effect
| Description/MODEL | Unit | MA-3060(i) | MA-3080(i) | MA-30120(i) | MA-30160(i) | MA-30200(i) | MA-30240(i) |
| CAPACITY |
|
|
|
|
|
|
|
| Center height | mm | 385 | |||||
| Swing over bed | mm | 770 | |||||
| Swing over gap | mm | 1010 (opt.) | |||||
| Swing over cross slide | mm | 520 | |||||
| Distance between center | mm | 1600 | 2100 | 3100 | 4100 | 5100 | 6100 |
| Bed width | mm | 450 | |||||
| SPINDLE |
|
| |||||
| Spindle bore | mm | Ø105(4”) | Ø155 (6”)opt. | ||||
| Spindle nose | - | A1-11 | A2-11 | ||||
| Spindle speeds 18 steps | rpm | 23~1293 | 13~690 | ||||
| Inverter type (Variable speeds) | H: 331~1500 M: 93~330 L: 20~92 | H: 176~800 M: 53~175 L: 10~52 | |||||
| TRAVEL |
|
| |||||
| Gross slide travel | mm | 450 | |||||
| Compound rest travel | mm | 250 | |||||
| TAILSTOCK |
|
| |||||
| Tailstock spindle dia. | mm | 105 | |||||
| Tailstock spindle travel | mm | 220 | |||||
| Tailstock spindle taper | - | MT#5 | |||||
| THREADS |
|
| |||||
| Lead screw | - | 2 TPI or 12 mm/pitch Ø45 | |||||
| Metric pitch threads | - | 0.8 - 14 mm/pitch (65 kinds) | |||||
| Inch pitch threads | - | 2 - 28 TPI (36 kinds) | |||||
| Module pitch threads | - | 0.5 - 7 M (22 kinds) | |||||
| DP threads | - | 4 - 56 TPI (36 kinds) | |||||
| FEEDING RANGE |
|
| |||||
| Range of longitudinal feeds | mm/rev. | 0.05 - 0.7 | |||||
| Range of cross feeds | mm/rev. | 0.025 - 0.35 | |||||
| MOTOR |
|
| |||||
| Main spindle motor | HP | 15 / 20 (opt.) | |||||
| Coolant pump motor | HP | 1/8 | |||||
| WEIGHT |
|
| |||||
| Net Weight | kg | 3350 | 3600 | 4100 | 4600 | 5100 | 5700 |
Note:
We have the right tomodify the specification or designs. If there are subjected to change without
priornotice.
MA-3000(i) Series
ACCESSORIES
| STANDARD ACCESSORIES |
| OPTIONAL ACCESSORIES |
| l Main drive motor | l CE conformity | |
| l Coolant equipment | l Gap bed | |
| l Electromagnetic brakes | l Digital Readout System | |
| l X / Z-axis rapid travel | l 3-Jaw scroll chuck | |
| l 4-way tool post | l 4-jaw independent chuck | |
| l Tail stock | l Double chuck system | |
| l Center sleeve | l Rear chuck adaptor | |
| l Dead center | l Face plate | |
| l Tool box & tools | l Quick change tool post | |
| l Independent Electrical Box | l Taper attachment | |
| l Operation & Service Manual | l Full length splash guard | |
|
|
| l Moving rear splash guard |
|
|
| l Chuck guard |
|
|
| l Chip and coolant shield |
|
|
| l Leadscrew guard |
|
|
| l Work light |
|
|
| l Steady rest |
|
|
| l Follow rest |
|
|
| l Micro-meter bed stopper |
|
|
| l Turret type 5-position bed stopper |
|
|
| l Rotating center |
|
|
|
|
