- The rigid construction bed are induction hardened over HRC50 and precision ground provides heavy duty turning and fine finishing at high accuracy.
- The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed ranges.
- The main spindle, shafts and gears in the headstock are made by high grade alloy steel, are hardened and precision ground for high speed running at lower noise level.
- The automatic lubrication pump equipped on apron provides all slide-ways and two axes ballscrews lubricants continually.
- The hardened and precision ground ballscrews for X & Z axes are mounted on high precision bearings to enable sensitive movement.
- Both X & Z axes equipped with individual electronical handwheels on control panel for manual operation as conventional lathes.
- Full length rear splash guard and front moveable chip trolley provides chip and coolants safety and easy clean.
- Both X & Z axes are equipped with selected controller whole package AC servo motors with its own power supply and monodrives.
Unit: mm(inch)
| MODELS | 1550 | 1825 | 1850 | |
| Swing over bed | 390 (15) | 460 (18) | ||
| Swing over cross slide | 220 (8.5) | 285 (11.2) | ||
| Distance between centres | 1250 (50) | 635(25) | 1250(50) | |
| Spindle nose (camlock) | D-1-6 | |||
| Spindle bore | 54 (2.125) | |||
| Tailstock spindle travel | 155 (6.125) | 140 (5.5) | ||
| Tailstock barrel diameter | 58.5 (2.3) | 73 (2.87) | ||
Standard Equipment:
- Automatic lubrication pump for slideways and ballscrews
- Automatic spindle speed gear change
- Cutting fluid coolant system
- Full enclosed end guard
- Headstock/gearbox oil cooler design
- Working light
- Leveling blocks
- Centers & center sleeve
- Service tools & toolbox
- Instruction & parts manual
Optional Accessories:
- Manual type 3-jaw scroll chuck
- Manual type 4-jaw independent chuck
- Hydraulic hollow chuck
- DIXON quick change toolpost
- Elec.4-way toolpost
- Elec.8-station turret (Front Mounting)
- Hydraulic tailstock
- Steady rest
- Follow rest
- Chain type chip conveyor with cart
- C-Axis with live turret
- Special functions by consult
