- Full geared headstock with 8 spindle speeds from 105-2000rpm.
- D1-4 camlock spindle nose.
- Rigid construction bed are induction hardened over HRC50 and precision ground.
- Harden and ground spindles & gears in headstock.
- The gears in gearbox are hardened and self-splash lubricated as oil bath.
- Feeding and threading function are interlocked to prevent setting simulaneously.
- Feeding direction and engagement are controlled by two push/pull plunger on apron.
- Swing over bed: 330mm.
- Both distance between centers 750mm and 1000mm bed.
- Front moveable chip tray easily for chip collection and cleaning.
- Adjustable controller to prevent over-travel for safety protection.
- Main spindle motor: 2.25kw (3HP).
- Foot brake pedal to apply quick stop and power off.
- Lockable tool drawers.
Unit: mm(inch)
| MODELS | 1330/1340 | |
| Swing over bed | 330 (13) | |
| Swing over cross slide | 190 (7.5) | |
| Distance between centres | 750 (30)/1000 (40) | |
| Spindle nose (camlock) | D-1-4 | |
| Spindle bore | 35 (1.375) | |
| Cross slide travel | 145 (5.7) | |
| Top slide travel | 95 (3.75) | |
| Tailstock spindle travel | 100 (4) | |
| Tailstock barrel diameter | 40 (1.56) | |
Standard Equipment:
- Low voltage control system
- Coolant system
- Backplate for 3-jaw chuck
- Threads indicators
- Centers & center sleeve
- Traveling chip guard
- Leveling blocks
- Service tools & toolbox
- Operation manual
Optional Accessories:
- 3-jaw chuck
- 4-jaw chuck
- Face plate
- Steady rest
- Follow rest
- Rotating center
- Halogen lamp
- Chuck guard
- Chip guard
- Leadscrew cover
- Ful length splash guard
- Taper turning attachment
- Quick change toolpost
- CE electrical system
- Variable speed
- Magnetic brake
- Any others by consult
