- Application: swiss type lathe, swiss type lathes, cnc swiss lathe, swiss turning machines, medical implant.Max. Turning Diameter 42mm.
- Both guide bush / Non guide bush are available for making complicated components.
- With hydraulic chuck system on main spindle, it accepted poor tolerance bar to save the material cost.
- Deep hole drilling on sub spindle side with central cooling system. It has both fixed and rotary type.
- The tooling system has two Y axis and Cs axis. Totally there are 37 tool holders and 19 of them are living tool.
- Cross and face drilling function are available on main and sub spindle.
- Built-in spindle with oil cooling system offers high efficiency, low noise and high accuracy environment.
| Model | Unit | SS - 42ABY |
|---|---|---|
| Max. turning dia. of main spindle | mm | 42 |
| Max. turning dia. of sub spindle | mm | 42 |
| Max. turning length | mm | Rotary guide bush: 200, Non guide bush: 125 |
| Max. drilling capacity of main spindle | mm | 30 |
| Max. drilling capacity of sub-spindle | mm | 30 |
| Max. tapping capacity of main spindle | mm | M16 |
| Max. tapping capacity of sub-spindle | mm | M16 |
| Max. cross drilling capacity | mm | 13 |
| Max. cross tapping capacity | mm | M10 |
| No. of external turning tools | pcs | 6 |
| No. of internal turning tools | pcs | 5 |
| No. of cross drillings | pcs | 4(5) |
| No. of external turning tools of sub-spindle | pcs | 4 |
| No. of internal turning tools of sub-spindle | pcs | 3 |
| No. of cross drillings of sub-spindle | pcs | 4 |
| No. of face tool holder of sub-spindle | pcs | 4 |
| Tool size | mm | 20 x 20 x 95~155 |
| No. of axis controls | pcs | C1/(C2)/X1/Y1/Z1/X2/Y2/Z2 |
| Main spindle bore | mm | 58 |
| Max. speed of main spindle | rpm | 15 ~ 6000 |
| Sub-spindle bore | mm | 56 |
| Max. speed of sub-spindle | rpm | 15 ~ 6000 |
| X / Z / Y-axis rapid traverse | m/min | 18 |
| Cross drilling speed of main spindle | rpm | 4000 |
| Face drilling speed of sub-spindle | rpm | 3000 |
| Main spindle motor | kw | 7.5(15) |
| Sub-spindle motor | kw | 7.5 |
| X1/Z1 motor | kw | 1.6 |
| Y1 motor | kw | 1.4 |
| Cross drilling motor of main spindle | kw | 1.6 |
| Face drilling motor of sub-spindle | kw | 1.6 |
| X2/Z2 motor | kw | 1.4 |
| Y2 motor | kw | 1.4 |
| Hydraulic motor | kw | 0.75 |
| Coolant pump motor | kw | 2.3x2pcs |
| Power requirement | kw | 40 |
| Lubrication capacity | L | 2 |
| Coolant tank capacity | L | 480 |
| Machine dimensions | mm | 3380 x 2455 x 2155 |
| Weight | kg | 7500 |
Standard Accessories
| ● Main system |
| –Main spindle Cs axis –External tool holder (6-tool) –Internal tool holder (5-tool) –Cross drilling tool holder (4-tool) |
| ● Sub system |
| –Sub spindle 5° multiple orientation –External tool holder (4-tool) –Intermal tool holder (3-tool) –Aside cross drilling tool holder (4-tool) |
| ● Parts catcher |
| ● Tool and tool box |
| ● Lighting device |
| ● Coolant device |
| ● Coolant inspection |
| ● Cut-off inspection |
| ● Non guide bush holder |
| ● Main/Sub spindle hydraulic cylinder |
| ● Central lubrication unit |
| ● Operation manual |
| ● Collet chuck |
Optional Accessories
| ● Simultaneously rotary guide bushing holder |
| ● End-face eccentric rotary tool holder of main spindle (3 position) |
| ● End-face eccentric rotary tool holder of sub-spindle (4 position) |
| ● ◎*Sub-spindle aside rotary tool holder (4 position) |
| ● Sub-spindle aside center cooling device for mark ◎ (1 position) |
| ● Spindle cooling system |
| ● Cutting oil cooler |
| ● Chip conveyor and cart |
| ● Oil mist collector |
| ● Voltage stabilizer |
| ● Transformer |
| ● Hydraulic bar feeder |
| ● CE certification |
