| Description | CDS-42 | CDS-52 |
| Control unit | ||
| Controller | Mitsubishi/syntec | |
| Min. input ubit | 0.001 mm | |
| Spindle | ||
| Bar capacity | Ø 42 mm | Ø 52 mm |
| Max. collect size | Ø 135 mm | |
| Max. spinlde speed | 6000 rpm | |
| Spindle Nose | A2-5 | A2-5 |
| Collet | TRB-42 | TRB-52 |
| Spindle | 7.5 kw | 11 kw |
| Center high | 1070 mm | |
| Axis | ||
| X1/X2 travel | 330/330 mm | |
| Z1/Z2 travel | 242/321 mm | 232/316 mm |
| X/Z rapid feed | 30 m/min | |
| X/Z serve motor | M:1/1 kw, S:1.3/0.8 kw | |
| Tool | ||
| OD tool shank | 16 x 16 mm | |
| ID tool shank | Ø 20 mm | |
*The Specifications are subject to change without prior notice.
CDS-42 Features
CDS-42 The two-spindle two-gang slide design maximizes machining efficiency in the smallest space, greatly reduces tool change time, and automatically loads robots for highly automated production.
High accuracy Build-in Spindle
Tool holders
OD L type
OD R type
Twin side Face for main spindle
Twin ID
Single ID
Twin side Face for main spindle
Cut off holder
Auto loading unloading system
This model is equipped with an automatic loading and unloading device, which can design the most suitable feeding table for different workpieces to achieve the most stable feeding efficiency.
Machine Size
Standard Accessories
- Tool box
- Collect chuck
- Bar feeder I/O
- Part catcher and conveyor
- Coolant system / a.Coolant pump, b.Flow switch, c.Sub spindle coolant
- Gang type tool holder
- Bulid-in spindle
- Air conditioner for cabin
- Chip conveyor
- Part out push bar for sub spindle
Options
- High pressure coolant
- Voltage Regulator / Transformer
- Oil skinner
- Oil mist collector
- Auto loading unloading system
- Bar feeder
