| Description | TK 960 | TK 1060 | TK 1200 |
| Capacity | |||
| Swing over bed | 960 mm (37.7") | 1060 mm (41.7") | 1170 mm (46") |
| Swing over cross slide | 650 mm (25.5") | 750 mm (29.5") | 860 mm (33.8") |
| Swing over gap | 1510 mm (59.4") | 1610 mm (63.3") | 1720 mm (67.7") |
| Center height | 480 mm (18.8") | 530 mm (20.8") | 585 mm (23") |
| Width of gap | 570 mm (22.4") | ||
| Bed width / Auxiliary guide | 560 mm (22") / 660 mm (25.9") | ||
| Between centers | 2M, 3M, 4M, 5M, 6M, 7M,8M,9M | ||
| Headstock | |||
| Spindle bore,dia. | Ø 156 mm (6") [Opt. 230 mm (9") ] | Ø 156 mm (6") [Opt. Ø 230 mm (9") , Ø 310 mm (12" ) Ø 360 mm (14") ] | |
| Spindle nose | A2-11 [Opt. A2-15] | A2-11 [Opt. A2-15, A2-20] | |
| Spindle speeds (rpm), 12steps | 9-600 [Opt. 6-400] | 9-600 [Opt. 6-400, 5-300] | |
| Main spindle motor | 25 HP (Opt. 30HP) | ||
| Feed and Threads | |||
| Cross travel | 540 mm (21.2") | ||
| Cross feeds | 0.065-0.96 mm / rev (48 kinds) | ||
| Longitudinal feeds | 0.13-1.92 mm / rev (48 kinds) | ||
| Lead screw diameter | Ø 50 mm (1.9") x 2TPI | ||
| Threading range, Metric | 2-30 mm / pitch (44 kinds) | ||
| Threading range, Inch | 1-15 TPI (48 kinds) | ||
| Module pitch threads | 1-15 M (32 kinds) | ||
| DP. Pitch threads | 2-30 P (48 kinds) | ||
| Compound rest travel | 300 mm (11.8") | ||
| Tool size | 40 x 40 mm (1.5 x1.5") | ||
| Rapid motor | 1/2HP | ||
| Tailstock | |||
| Quill Diameter | Ø 140 mm (5.5") [Opt. bigger quill Diameter] | ||
| Center taper | MT6 | ||
| Quill travel | 300 mm (11.8") | ||
*The Specifications are subject to change without prior notice.
Copy device with 120mm stroke length
Semi-automatic rapid threading attachment
Heavy duty cast iron tailstock body
MT6 taper quill movement by 2 speed reduction box and handwheel
Heavy duty taper attachment
Standard Accessories
- Inch/metric dual gear box
- 4-ways toolpost with T slot
- Work light
- Coolant system
- Thread chasing dial
- Cross & longitudinal rapid travel
- Longitudinal bar with travel dogs (for carriage stop)
- Magnetic brake for main spindle
- Sleeve & centers
- Tool box with tools
- Manual
Options
- Upgrade spindle bore
- Upgrade spindle motor
- Chuck or Face plate
- Adaptor for rear chuck
- Front chuck protection cover
- Rear chuck protection cover
- 4-position carriage stop
- Steady rest
- Follow rest
- Rear tool post
- Quick change tool post
- Boring bar tool holder
- Rapid threading attachment
- Auto feed on top slide
- Copy attachment (stroke 120mm)
- Taper attachment (±10 degree, stroke 500mm)
- Rotating center, MT7
- Full length rear splash guard (BC. 2M-5M)
- Movable rear splash guard
- CE mark
TK-960/1060 series
