| Model | TNC-460N | TNC-540N | TNC-630N | |||
| Swing over bed | Ø 460 mm (18") | Ø540 mm (21") | Ø 630 mm (25") | |||
| Swing over cross slide | Ø 230 mm (9") | Ø310 mm (12") | Ø 400 mm (15") | |||
| Center height | 230 mm (9") | 270 mm (10.6") | 315 mm (12") | |||
| Distance between centers | 1000 mm (40") / 1500 mm (60") / 2000 mm (80") | |||||
| Width of bed | 350 mm (13.8") | |||||
| Spindle nose | D1-6 | D1-8 | A2-11 (OPT) | D1-8 | A2-11 (OPT) | A2-11 (OPT) |
| Auto change spindle speed ( 3 steps ) | H :681 - 3000rpm M :153 - 680rpm L :33 - 152rpm | H :491 - 2250rpm M :126 - 490rpm L :27 - 125rpm | H :331 - 1500rpm M :93 - 330rpm L :20 - 92rpm | H :491 - 2250rpm M :126 - 490rpm L :27 - 125rpm | H :331 - 1500rpm M :93 - 330rpm L :20 - 92rpm | H :176 - 800rpm M :53 - 175rpm L :10 - 52rpm |
| Spindle bore | Ø 56 mm (2.2") | Ø 85 mm (3.3") | Ø 105mm (4") | Ø 85mm (3.3") | Ø 105mm (4") | Ø 153mm (6") |
| Longitudinal travel (Z axis) | 810 mm (31.8") / 1310 mm (51.5") / 1810 mm (71.2") | |||||
| Cross slide travel (X axis) | 280 mm | 350 mm | ||||
| Cross slide width | 190mm (7.3") | 125 mm (5") | ||||
| Size of tool post shank | 25 mm x 25 mm (1 x 1") | |||||
| Tailstock quill diameter | Ø75 mm (2.95") | |||||
| Tailstock quill travel | 170 mm (6.6") | |||||
| Tailstock quill taper | MT5 | |||||
| Spindle motor | 7.5 HP / 10 HP OPT) | 10 HP / 15 HP OPT) | ||||
| Drives (X, Z) | SERVO | |||||
| Rapid traverse X, Z | 5000, 7000 mm / min. | |||||
| Range of feeds in manual mode | 0.01-500 mm / rev. | |||||
| Coolant pump motor | 1/6 HP | |||||
| Machine weight | 2900 kgs / 3200 kgs / 3500 kgs | 3100 kgs / 3400 kgs / 3700 kgs | 3200 kgs / 3500 kgs / 3800 kgs | |||
*The Specifications are subject to change without prior notice.
Work Range
| Model | TNC460N / 540N / 630N x 1000 | TNC460N / 540N / 630N x 1500 | TNC460N / 540N / 630N x 3000 |
| A1 | 1000 (40") | 1500 (60") | 2000 (80") |
| B1 | 804 (32") | 1304 (51") | 1804 (71") |
| C1 | 800 (32") | 1300 (51") | 1800 (71") |
Dimension
| Model | A | B | C |
| TNC460N / 540N / 630N x 1000 | 2720 (107.1") | 1870 (73.6") | 1900 (78.4") |
| TNC460N / 540N / 630N x 1500 | 3220 (126.8") | 1870 (73.6") | 1900 (78.4") |
| TNC460N / 540N / 630N x 3000 | 3720 (146.5") | 1870 (73.6") | 1900 (78.4") |
Standard Accessories
- Auto lubrication system
- Coolant system
- Full splash guard
- RS-232 port
- Work light
- Adapter sleeve
- Two dead centers
- Leveling bolts & pads
- Tool box with tools
- Inspection record
- Operation & service manual
Options
- Larger spindle motor
- 3-jaw chuck
- 4-jaw chuck
- Face plate
- Steady rest
- Follow rest
- Rotation center, MT5
- Hydraulic tailstock
- 4 stations manual toolpost
- Quick change toolpost
- 4 stations electric turret
- 8 stations hydraulic turret with direct type disk
- Chip conveyor
- CE mark
