Plate and Block Bandsaw LPS120-160-3
Sophisticated technology for more performance
Especially for the processing of large plates and solid blocks, the large plate and block bandsaws of the LPS series are extremely robustly built. They are characterised by unsurpassed precision and cutting performance - especially when sawing difficult-to-machine aerospace materials such as Inconel or titanium. Expensive material waste is thus consistently avoided.
Features of the LPS120-160-3
- Cast iron bａnd guiding parts
are made by Behringer and provide vibration damping directly at the cutting edge, thus increasing tool life.
- Quick bandsaw blade change
Quick and easy – tool-free bandsaw blade changes mean shortest set-up times. Just a few simple steps are all that is needed to change the bandsaw blade.
- Unsurpassed precision and cutting performance
The high cutting accuracy, quiet running and long blade life are all down to the special torsion resistant design of the saw frame. In comparison to plate and block bandsaw machines from other manufacturers, the force for the saw feed is applied directly beneath the cutting point, which results in feed movements that are considerably more accurate.
- Modular design
The sawing machine's design can be flexibly adapted to special requirements. Whether larger panel dimensions or higher table loads - almost all requirements can be met thanks to the modular design from the ground up.
- Servo Feed System
The Behringer servo feeding system ensures constant chip removal and makes better use of the capabilities of modern bandsaw blades. The rapid response of the servo feeding system to the sensors for the cutting pressure regulation systematically prevents overloading and premature wear of the bandsaw blades.
- A carefully designed machine concept
The longitudinal cutting method is a typical feature of the plate and block bandsaws from Behringer. The workpiece remains firmly clamped to the material table while the saw unit moves.
- Application-specific table versions
LPS bandsaws can be adapted to suit your exact requirements. The material support table has a modular construction and can be equipped with a variety of different options with a spacing pattern of 250 mm.
