L3鋁邊彎字機簡介:
L3鋁邊彎字機是一款專門針對鋁型材折彎的彎字機。本設備可以折彎的材料包括了邊帶、鋁型材、鋁板,折彎的材料厚度為0.3~1.5mm,材料寬度為15~135mm,最小折彎R10。本設備采用的是合金刀開槽,圓軸擠出。
L3 aluminum edge bending machine introduction:
The L3 aluminum edge bender is a typeface machine designed for bending aluminum profiles. The material that can be bent by this equipment includes side belts, aluminum profiles, aluminum plates, and the material thickness of the bending is 0.3~1.5mm, the material width is 15~135mm, and the minimum bending is R10. This equipment uses alloy knife slotting and round shaft extrusion.
L3鋁邊彎字機是L1的匠心升級款:
1、夾料板升級為方軌定位,便于調試!
2、上下軸升級為絲桿傳動,力度更大,開槽更穩!
3、托料架手把搖動式升降,方便簡單!
4、刀頭直徑升級為7.5cm,彎弧范圍更寬!
5、彎弧器立柱變小,連續小弧度折彎更容易!
The L3 aluminum edge bender is a new upgrade for the L1:
1. The clamping plate is upgraded to square rail positioning for easy debugging!
2, the upper and lower shafts are upgraded to screw drive, the force is greater, and the slot is more stable!
3, the support frame handles the shaking type lifting, convenient and simple!
4. The diameter of the cutter head is upgraded to 7.5cm, and the curved arc range is wider!
5, the arc bender column becomes smaller, continuous small arc bending is easier!
L3鋁邊彎字機的使用要求:
1、我們強烈建議把L3鋁邊彎字機放置于干燥通風的壞境中使用,并且需要避免高壓;
2、L3鋁邊彎字機的額定電壓為220V,因此需要進行地面連接,這樣你可以防止靜電產生;
3、在使用L3鋁邊彎字機畫圖的時候,是刪除多余的節點,因為多余的節點會影響折彎的精度和彎曲度,在處理好后再導入彎字機軟件中。
L3 aluminum edge bending machine requirements:
1. We strongly recommend placing the L3 aluminum edge bender in a dry and ventilated environment and avoiding high pressures;
2, L3 aluminum edge bending machine rated voltage is 220V, so you need to make ground connection, so you can prevent static electricity;
3. When drawing with the L3 aluminum edge bender, it is best to delete the extra nodes, because the extra nodes will affect the precision and curvature of the bend, and then import them into the font machine software after processing.
L3鋁邊彎字機技術參數表
L3鋁邊彎字機技術參數表 | |
開槽方式 Slotting System | 合金刀開槽 double cutters slotted system |
折彎方式 Bending system | 圓軸擠出 double blade alternate bending sytem |
規格尺寸 Dimensions | 1400*900*1200mm |
使用材料 Suitable materials | 邊帶、鋁型材、鋁板 Aluminum |
材料寬度 Material height | 15~135mm |
材料厚度 Material thickness | 0.3~1.5mm |
精度 Accuracy | R10 ±0.1mm |
文件格式 File Format | .dxf .plt |
電源 Power | AC220V 50HZ 2.4KW |
整機重量 Weight | 200kg |
優勢