ZX5150A鉆銑床結構特點：
1.工作臺采用矩形導軌穩定性好
2.主軸自動進給
3.機頭可旋轉±45°
4.工作臺面及導軌經超頻淬火
ZX5150A鉆銑床參數
主要技術參數 | Main specification | ZX5150A |
立銑直徑 | Max.diameter of vertical mill | 32mm |
端銑寬度 | Max. Diameter of end mill | 125mm |
鉆孔直徑 | Max. Drill diameter | 50mm |
主軸孔錐度 | Spindle taper | 7:24 ISO40 |
主軸行程 | Spindle travel | 180mm |
主軸轉速范圍 | Spindle speed range | 94-2256rpm (16step) |
套筒自動進給級數 | Automatical feed step of sleeve quill | 0.1/0.15/0.3mm/r (3step) |
主軸端面至工作臺面距離 | Distance from spindle end to table | 100-580mm |
主軸中心至主軸表面距離 | Distance from spindle center to spindle surface | 400mm |
主軸箱回轉角度 | Rotary angle of spindle box | ±45° |
主軸箱升降速度 | Lifting speed of spindle box | 2000mm/min |
工作臺面尺寸 | Table size | 1250x360mm |
工作臺行程 | Table travel | 600x360mm |
工作臺機動進給范圍 | Table power feed range | 22-555mm/min (8step) |
工作臺T型槽數/寬度/距離 | T-slot/width/distance | 3/18/80mm |
主電機功率 | Main motor power | 1.5/2.4kw |
進給電機功率 | Feed motor power | 750w |
升降電機功率 | Lifting motor power | 550w |
冷卻泵電機功率 | Coolant pump motor power | 40w |
凈重/毛重 | N.W/G.W | 1800/2000kg |
外形尺寸 | Overall size | 1800x1900x2300mm |
