技術參數 TECHNICAL SPECIFICATION
型號 | Model | L-3(C6246) |
工件長度 | Max.distance of between centers | 1500mm(60″) 2000mm(80″) |
床身上中心高 | Height of centers | 230mm(9″) |
床身上工件回轉直徑 | Max.swing over bed | φ460mm(18″) |
刀架上工件回轉直徑 | Max.swing over tool-post | φ270mm(11″) |
馬鞍槽上工件回轉直徑 | Max.swing over gap | φ685mm(27″) |
通過主軸孔棒料直徑 | Max.bar stock | φ52mm(2″) |
公制螺紋種數/螺距范圍 | Metric thread number/pitches range | 21/0.25~6mm |
英制螺紋種數/每寸牙數范圍 | withworth thread number/pitches range | 32/28~2t.p.i |
主軸孔徑 | Bore of spindle | φ52mm(2″) |
主軸轉速范圍 | range of spindle spedds | 34~1034rpm |
主軸套內孔錐度 | Taper of bore in spindle center sleeve | morse no.4 |
主軸每轉刀架進給范圍橫向/縱向 | range of spedds of per revolution of spindle cross/longitudinal | 0.10~2.80mm/0.11~3.00mm |
小刀架最的行程 | Max.travel of top tool-post | 150mm(6″) |
刀架移動距面 縱向/橫向 | Max.travel of cross tool-post longitudinal/cross | 1420/280mm 1920/280mm |
車刀刀桿截面尺寸 | Max.size of tool shank section | 20×25mm |
刀架回轉角度范圍 | rotating angle range of tool-post | ±45° |
尾座主軸行程 | Max.travel of tailstock center sleeve | 120mm |
尾座主軸椎孔 | bore taper of tailstock center sleeve | Morse no.4 |
主電機功率 | Power of main motor | 4/5.5kw |
冷卻泵電機功率 | Power of cool pump | 120w |
冷卻泵流量 | Deilvery of cool pump | 25L/min |
機床外形尺寸 | overall dimensions(l×w×h)mm | 2960×950××950×1350 |
包裝箱外形尺寸 | packing size(l×w×h)mm | 3100×1140××1140×1660 |
重量 凈重/毛重 | weight net/gross kg | 外銷 1900/2550 2150/2850 |
內銷1900/2550 2150/2600 |