PENTACUT
ISCAR’s 5 cutting edge PENTACUT 24 and 34 inserts are designed for multifunction applications including grooving, parting, recessing and chamfering.
This cost effective insert is designed to perform grooving operations and parting off solid bars up to 20 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique J and C-type chipformer to achieve excellent chip control in grooving, parting and recessing (light side turning) applications.
PENTACUT also has the ability to perform threading applications. Full profile inserts are available in the following thread standards: ISO, UN, Whitworth, BSPT and NPT. Partial profile inserts are available in 600 (MT) and 550 (WT) profiles.
The insert is tangentially mounted on a side of the holder, positioned against two peripheral contact surfaces to ensure accuracy of center height. Clamping of the insert is by a side torx screw. The torx screw can be activated from either side of the holder to enable insert indexing (rotation) without having to remove the holder from the machine turret. The short head of the holder ensures minimal overhang and high stability. The PENTACUT tools can be mounted on any type of lathe.
Features
- A combination of very rigid clamping system and a strong insert design enables machining at very high machining parameters
- In case of edge breakage, the tool will survive and other cutting corners may still be used
- Easy and fast-edge indexing from either side of the holder
- Multi-corner, five cutting edges that provide the most advantageous price per cutting edge
Range of Products
Inserts are available for parting, grooving, recessing and chamfering in a width range of0.5 to 4.23 mm.
The inserts are available in grade IC1008/IC908 with an advanced submicron substrate and PVD coating.
For more information about the PENTACUT tools, click here.
For more information about the PENTACUT inserts, click here.
ISCAR PENTACUT