TURN & MILL CENTER N50 MC
Added value:
- Fle-xi-ble com-plete machi-ning with incre-men-tal tur-ning lengths up to 7,500 mm with one or two independent
machi-ning modules - A variety of inter-nal machi-ning capa-bi-li-ties with sepa-rate boring slide
- sta-tio-nary or NC adjus-ta-ble boring bars
- auto-ma-tic boring bar change from separate
8 pocket/16 pocket boring-bar magazine - boring bars with / without head change
- 30kN boring quill, optio-nally rever-si-ble by 180°
- NC inter-nal tur-ning head with a tra-vel of 60 mm (D‘Andrea-tool)
- Optio-nal cranks-haft mil-ling unit with large plun-ging depth and a maxi-mum mil-ling power of 73 kW
- Heavy-duty tur-ning, dril-ling and mil-ling head with a mil-ling power of 67.4/80 kW
- Sepa-rate ver-ti-cal 64 kW rough mil-ling unit with Y?axis and self-con-tai-ned tool magazine
Technical data
| Spe-ci-fi-ca-tion | N50 MC | |
| CNC-Con-trol | ||
| Con-trol system | SINUMERIK 840D sl | |
| Drive sys-tem | SYNAMICS S120 | |
| Working area | ||
| Tur-ning length | mm | 2000 / 3000 / 4500 / 6000 / 7500* |
| Swing dia-me-ter | mm | 1500 |
| Sli-de-tra-vel X?axis | mm | -20…+1050 |
| Sli-de-tra-vel Y?axis | mm | ?400…+395 | ?475…+300 |
| Main spindle | ||
| Spindle head acc.to DIN 55026 | size | A15 | B20 |
| Spindle bore | mm | 160 | 225 |
| Bea-ring diameter | mm | 280 | 360 |
| Main spindle drive | ||
| Drive power S6-40% duty cycle / S1- duty cycle | kW | 77/64 | 87/78 | 115/100 |
| Speed range | rpm | 0…1400 | 0…1244 | 0…888 |
| Tor-que S4-40% duty cycle / S1- duty cycle | Nm | 6900/5765 | 11020/ 9880 | 15000/13040 |
| Speed range C?axis mode | rpm | 0…50 |
| Feed dri-ves | ||
| Rapid feed rates X, Y, Z | m/min | 12 / 12 / 24 |
| Tur-ning-Mil-ling-Dril-ling-Head | ||
| Tool sys-tem | size | HSK 100T, C8 |
| Drive power S6-60% duty cycle/ S1- duty cycle | kW | 43,3/38 | 80/67,4 |
| Max. Speed range | rpm | 3500 | 4500 | 5500 | 3000 |
| Swi-vel range of B?axis | degrees | -105…+95 |
| Tool maga-zine | ||
| Pockets | num-ber | 48 | 72 | 96 | 120 | 144* |
| Max. tool length | mm | 900 | 600/600 | 300/900 |
| Max. weight | kg | 25 |
| Tail-stock | ||
| Quill tra-vel | mm | 300 |
| Quill dia-me-ter | mm | 195 | 240 |
| Quill centre | size | MK 6 | ME 80 |
| Clam-ping force | kN | 5…35 / 8…55 |
| *fur-ther opti-ons avail-able on request | ||
