TURN & MILL CENTER N20 MC
Added value:
- Fle-xi-ble com-plete machi-ning with incre-men-tal tur-ning lengths up to 3000 mm with one or two sepa-rate machi-ning modules
- Can be equip-ped with lower tool slide with auto-ma-tic tool changer
- Machi-ning of high tem-pe-ra-ture-resistant mate-ri-als, auto-ma-tic tool chan-ger with inte-gral coo-lant sup-ply up to 350 bar
- Pro-cess combinations:
- Tur-ning / dril-ling / mil-ling with uni-ver-sal head
- Gear hob-bing
- 4?axis tur-ning
- Inte-gral grin-ding facility
Technical data
| Spe-ci-fi-ca-tion | N20 MC | |
| CNC-Con-trol | ||
| Con-trol system | SINUMERIK 840D sl | |
| Drive sys-tem | SINAMICS S120 | |
| Working area | ||
| Tur-ning length | mm | 1000 / 1500 / 2000 / 2500 / 3000 / 3500* |
| Swing dia-me-ter | mm | 650 |
| Sli-de-tra-vel X?axis | mm | -15…+660 |
| Sli-de-tra-vel Y?axis | mm | -150…+200 |
| Main spindle / Coun-ter spindle | ||
| Spindle head acc.to DIN 55026 | size | A8 | A11 |
| Spindle bore | mm | 92 | 105 |
| Bea-ring diameter | mm | 150 | 180 |
| Main spindle drive | ||
| Drive power S6-40% duty cycle/ S1- duty cycle | kW | 34 / 30,4 | -/ 32 |
| Speed range | rpm | 0…3800 0…2800 |
| Tor-que S6- 40% duty cycle / S1- duty cycle | Nm | 655 / 580 | – / 1200 |
| Speed range C?axis mode | rpm | 0…100 | 0…100 |
| Feed dri-ves | ||
| Rapid feed rates X, Y, Z | m/min | 25 / 12 / 40 |
| Tur-ning-Mil-ling-Dril-ling Head | ||
| Tool sys-tem | size | HSK 63T, Capto C6 |
| Drive power / S6-60% duty cycle | kW | 25 / 22 |
| Max. Speed range | rpm | 6000 |
| Swi-vel range of B?axis | degrees | -105..+95 |
| Tool maga-zine | ||
| Pockets | num-ber | 48 (60) | 96(120) |
| Max. tool length | mm | 600 | 600 / 400 |
| Max. weight | kg | 15 |
| Tail-stock | ||
| Quill tra-vel | mm | 162 | 160 |
| Quill dia-me-ter | mm | 140 | 150 |
| Quill centre | size | MK 5 |
| Clam-ping force | kN | 3…17 | 4…20 |
| *fur-ther opti-ons avail-able on request | ||
