四面夾持與求心符合您的需求
長方形、正方形工件夾持并不簡單， 不只是因?yàn)楣畈欢ㄒ蛩兀?還可能是根本無法四面同時夾持， 當長方形工件無法牢固的被夾持， 會因?yàn)檎饎佣仁沟毒邏勖焖贉p短， 工件加工的公差就不易控制。
夾具王2x2夾頭提供給您，具備長、寬補償功能，可以正負0.5mm超大預留尺寸，而且可以四面全部緊密夾持， 讓夾具可以高速旋轉而且相互補償誤差。四瓣的夾固頭， 每片均可以全力夾持， 讓加工更加順暢與快速。
您有長方形工件夾持問題嗎？
還是一個有創造性的工件需要的夾具系統呢？
優勢：
?四面全力夾持
?同心度
?快速換模
?較大夾持力矩
?平行夾持
?超剛性
?抗磨耗
EFFECTIVE MATERIAL TO EDIT WITH LESS TOOL WEAR
Commercially available rectangular profiles can be tricky. It‘s not just the fact of depending on wide tolerance, all four sides of the profile may not have contact with all four sides of the clamping head. However, dimension and profile variances are also very common. Not to mention the tremendous tool wear caused by vibration when the rectangular profile is not clamped properly.
Key advantages
●Secure clamping of square material on all 4 sides with the same clamping force
● Compensating large square material tolerances
 ●Typical HAINBUCH features, such as user friendly set-up, full passage, parallel clamping, optimal power conversion, extreme rigidity and superior holding power, as well as minimal wear and tear
 ●Standard clamping heads can be used for clamping round material as well