雷尼紹renishaw HPMA 在線對(duì)刀

The HPMA is a motorised
swingdown tool setting arm,
featuring the RP3 three axis
probe.
The patented rotary kinematic design
ensures highly repeatable stylus
positioning each time the HPMA is
swung down into its 'ARM READY'
position.
The design also provides a positive
engagement into position at both the
'ARM READY' and 'MACHINE READY'
positions. A bi-colour LED indicates
probe status and also informs the
operator that the system is ready for use.
HPMA is designed specifically for
use with the TSI3 interface. Do
not use the HPMA with any other
interface.
★ Contact Renishaw’s Styli and
Custom Products Division for
information on other arms options.
System components
• Arm/hub assembly with probe
The arm/hub assembly is a fully
sealed, compact design available
in a range of sizes to suit most
machines. Renishaw has
recommended arm
configurations for all standard
chuck sizes. The data sheet
includes top level kit numbers for
machine chuck sizes 6 ", 8 ", 10 ",
12 ", 15 ", 18 " and 24 ".
Renishaw also has
recommended stylus
configurations for all standard
tooling sizes.
The data sheet includes top level
kit part numbers for tooling sizes
16 mm, 20 mm, 25 mm, 32 mm,
40 mm and 50 mm. Where these
are not suitable, arms can be
configured by Renishaw to suit
the particular requirement.★
• Probe enclosure
A separate enclosure protects the
probe when the arm is not in use.
• TSI3 interface
The interface processes signals
between the probe and the
machine’s control allowing simple
integration. The unit is DIN rail
mounted and features an 'Easy fit'
location mechanism. There are two
connectors for simple wiring to the
HPMA (6-way) and machine
controller (25-way 'D' type).