以大型工件的重切削為加工對象的高剛性加工機
為用戶創造Neo Value（新價值）的高剛性、高精度的龍門加工機。SNK龍門機的中端機型。 在熱變形對策上精益求精。
- 汽車
- 飛機
- 一般
- 造船
- 重電
- 原材料
- 半導體
- 專用機器
特點Characteristic
- Structure that enables high rigidity and high accuracy
- Main axis characteristics and cutting force that can withstａnd heavy cutting
- Solution software to make productivity difference
Improved rigidity and accuracy with optimized structure
By using FEM analysis (finite element method), we realized weight saving of structure while maintaining mechanical rigidity by optimum thickness and rib arrangement.In addition, we verified the static rigidity and dynamic rigidity analysis beforehａnd by loading the cutting load with 3D model, and improved the processing quality.
Square column structure minimizing the influence of environmental temperature change
The square column which is most easily influenced by temperature change prevents forward falling as a "heat capacity symmetric structure column" with the thermal equilibrium board mounted on the column and constitutes a robust gate type structure.
Newly developed horn square ram
A new 350×350 mm square ram using high-strength spheroidal graphite cast iron (FCD material) is newly developed for ram, which enables high-strength cutting by driving the center of gravity of two Z-axis ball screws.This allows heavy cutting regardless of whether it is vertical or horizontal even for feeding out with a Z-axis stroke of 800 mm.
Increase main shaft stiffness
High power spindle with power 60/44 kW (30 min / continuous), torque 1,306 / 1,200 N?m (10min /continuous), rotation speed 30 - 5 000 min - 1 is mounted, high rigidity processing in low speed range possible.
Adoption of spindle structure corresponding to heavy cutting
It adopts twin built-in motor for spindle drive, it is highly efficient with gearless, finished in maintenance free.
Processing with high output spindle
As a result of verifying the discharge amount of chips by full power cutting of φ 200 milling cutter, the cutting amount of 1,305 cc / min at the main spindle 44 kW shows the highest ability in the same class.In addition, due to the development of a strong angular attachment, it has been raised to the same power as the spindle machining, and has a cutting ability of 840 cc / min at 37 kW.
Software that increases the value of machines
With the installation of "Intelligent PC" (option compliant) that supports maintenance and analysis support by observing the machine operating condition and operating / alarm history etc., the situation to the personal computer and the smartphone is notified, and it corresponds also to the "visualization" of the machine.
Software that provides security and safety
It is also possible to install functions to prevent human error such as notification of collision between tool and work (Si - Stop) and tool insertion into ATC magazine (Si - ToolCheck), proposing processing under safe and secure environment.
?
規范Specification
- 主要規格
| 主要規格 | NeoV-4M | NeoV-5M | NeoV-6M | |
|---|---|---|---|---|
| 作業面尺寸工作臺 | mm | 4,000 ×2,000 | 5,000 ×2,500 | 6,000 ×3,000 |
| 交換工作臺上表面至 主軸端距離 | mm | 1,800 | 2,050 | 2,050 |
| 主軸轉速 | min-1 | 30~5,000 | ||
| 主軸電機 （30分鐘額定/連續額定） | kW | 60/44 | ||
