高剛性、大扭矩主軸，針對難切削材料（鈦合金）加工的輪廓加工機
面向以鈦合金為代表的難切削材料，搭載1,256/1,005N?m大扭矩主軸，所有進給軸采用滑動導軌面提高振動衰減性，實現難切削材料的穩定加工
- 汽車
- 飛機
- 一般
- 造船
- 重電
- 原材料
- 半導體
- 專用機器
特點Characteristic
Features of horizontal 5 axis profiler for titanium processing
- Horizontal 5 axis profiler for processing titanium material with high demａnd for aircraft parts
- Various efforts to maintain high rigidity
- Safety and environmental considerations
High rigidity · High torque spindle
By adopting a tool of HSK-125A (flange diameter: 125 mm) to suppress the deformation by setting the main shaft diameter to 130 mm, and by using a high output (60/75 kW) · high torque (1005/1256 Nm) motor 330 cc / min We realized the amount of chip discharge.
The feed mechanism of each shaft and the sliding surface
Turkite is adopted as the sliding surface of this machine, and low frequency vibration easy to occur in heavy cutting is efficiently attenuated, making stable cutting possible.
Minimize backlash by increasing rigidity of each axis feed mechanism
Each linear axis is sent with a ball screw with high rigidity double nut and the pivot shaft adopted SNK's own double pinion drive.This minimizes backlash, making it a reliable mechanical structure.
Distance from column sliding surface to spindle end
HPS-120B which has many achievements as an aluminum processing machine has dimensions of 1,570 mm from the column sliding surface to the spindle end.If you attach a spindle head and a swivel saddle with high rigidity and high torque to this machine based on this form, this distance will further extend.Therefore, in order to realize stable titanium processing, we newly designed a structure for receiving a large cutting force with a column by FEM analysis.
Efforts to improve processing cycle time
Normally, since the 5-axis spindle head of the A / C axis swivel has a structure incorporating the swivel saddle, it is necessary to exchange the tool beyond the saddle width, and a separate tool transfer device is required.Therefore, it takes time to transfer the tool and the ATC time becomes long.In order to shorten this time, we increased the speed by driving the tool conveying device with a ball screw and a servomotor, and using the ATC arm as a cam drive.
Equipment suitable for the properties of the workpiece
Titanium materials have a characteristic of low thermal conductivity.Therefore, a large amount of coolant is required to cool heat accumulated in the cutting edge during processing.This machine is equipped with large capacity coolant (1,000 L, * Op: 2,000 L) and shower coolant, and by providing a device that efficiently cools and lubricates the material during processing, stable processing becomes possible.
Environmentally friendly equipment in the factory
When high-speed rotation and high-speed feed are achieved, the risk of scattering of tools and chips due to centrifugal force increases accordingly.Furthermore, it is also an important factor from the viewpoint of plant environmental preservation to prevent the scattering of coolant to be used in large quantities.For that reason, this machine was equipped with a splash guard that surrounds the periphery of the machine, so that we kept safety of the operator and the environment inside the factory clean.
Safety device for special materials
Titanium is chemically active and responds well to oxygen and nitrogen, and there is a possibility of fire due to sparks during cutting.As a countermeasure to that, safety measures are taken for special materials by installing a fire extinguisher.
?
規范Specification
- 主要規格
| 主要規格 | HPS-120A | HPS-150A | HPS-200A | |
|---|---|---|---|---|
| 作業面尺寸工作臺 | mm | 4,300×1,220 3,048×1,220 | 4,000×1,500 6,000×1,500 | 3,860.9×2,082.8 |
| 交換工作臺上表面至 主軸端距離 | mm | 1,000 | 1,000 | 1,270 |
| 主軸轉速 | min-1 | 40~5,000 40~4,000 | 40~5,000 40~4,000 | 20~3,600 |
| 主軸電機 （25%ED/持續評級） | kW | 37/30 75/60 | 37/30 75/60 | 45/37 |
