上海四機-升降臺銑床X6132
- 產品型號:X6132升降臺銑床
產品說明:
項目名稱Item | 單位Unit | 參數 Parameters | |
工作臺 Working Table | 工作面積(寬×長)Working surface(W×L) | mm | 320×1320 |
承載重量Load | kg | 500 | |
回轉角度Max.swivel angle | deg | ±45° | |
T型槽數目No.of T-slots |
| 3 | |
T型槽寬度Width of T-slots | mm | 18 | |
T型槽間距Distance between T-slots | mm | 70 | |
工作臺中心線至床身垂直導軌面距離最小/ Distance from centre line of table to vertical guideway surface of column min/max | mm | 215/470 | |
行程 Travel | X向(工作臺縱向)手動/機動Longitudinal (manual / auto) | mm | 700/680 |
Y向(滑座橫向)手動/機動Cross (manual / auto) | mm | 255/240 | |
Z向(升降臺垂向)手動/機動Vertical(manual / auto) | mm | 320/300 | |
主軸 Spindle | 轉速Speed | r/min | 30-1500 |
轉速級數No.of spindle speeds | 級step | 18 | |
錐孔Taper |
| ISO7:24 No.50 | |
主軸中心線至工作臺面距離最小/ Distance from spindle axis to table surface min./max. | mm | 30/350 | |
進給 Feedrates | 縱向進給速度Longitudinal feed rate | mm/min | X:23.5~1180 |
橫向進給速度Cross feed rate | mm/min | Y:15~786 | |
垂向進給速度Vertical feed rate | mm/min | Z:8~394 | |
縱向快速移動速度Longitudinal rapid feed rate | mm/min | X:2300 | |
橫向快速移動速度Cross rapid feed rate | mm/min | Y:1540 | |
垂向快速移動速度Vertical rapid feed rate | mm/min | Z:770 | |
進給級數No.of feeds | 級Step | 18 | |
電動機 Motor | 主軸電機功率Power of spindle motor | kW | 7.5 |
進給電機功率Power of feed motor | kW | 2.2 | |
其他 Others | 機床外形尺寸(長×寬×高)Overall dimension(L×W×H) | mm | 2294×1770×1610 |
機床凈重(約)Net weight of machine(approximately) | kg | 2650 |