T7240立式精鏜床詳細技術參數
| zui大鏜孔直徑 | Max. diameter of boring hole | 400mm |
| zui大鏜孔深度 | Max. height of boring hole | 1100mm |
| 滑架（即主軸）zui大移動量 | Max. movement of spindle | 1350mm |
| 立架手輪每轉 | Hand wheel per round of spindle | 10mm |
| 主軸中心線至立柱導軌面距離 | Distance from spindle center line to vertical column guide way surface | 480mm |
| 主軸端面至工作臺面zui大距離 | Max. distance from spindle face to working table | 1390mm |
| 主軸端面至工作臺面zui小距離 | Min. distance from spindle face to working table | 40mm |
| 工作臺工作面尺寸 | Working table surface size | 1600mm×630mm |
| 工作臺T型槽數 | T slots amount | 5 |
| 工作臺縱向zui大移動量 | Max. longitudinal movement of working table | 1200mm |
| 工作臺橫向zui大移動量 | Max. transverse movement of working table | 100mm |
| 主軸變頻范圍 | Frequency conversion range of spindle | 5-95Hz stepless speed |
| 主軸每轉進給量（毫米） | Feed amount per round of spindle | 0.05,0.08,0.125,0.20 mm |
| 主軸快速移動速度 | Rapid movement of spindle | 3000mm/min |
| 主軸慢速移動速度 | Slow movement of spindle | 60mm/min |
| 工作臺縱向快速移動速度 | Rapid longitudinal movement of working table | 1000mm/min |
| 主電機功率 | Main motor power | 7.5Kw |
| 工作臺快速電機 | Rapid motor of working table | 750W |
| 機床外形尺寸（長×寬×高） | Overall dimensions L×W×H | 2500×2400×3728 mm |
| 機床總重量 | Total weight | 15T |
