LS系列 橋式龍門加工中心產品介紹：

采用橋式結構,工作臺、工件保持靜止,所有加工由*運動來完成。
運動慣量小,改善提高動態性能和加工速度,大行程下亦可高穩定性,是大型高速加工的結構。
結構優點包括：
1、承載大,是同規格定梁龍門機床的2-3倍,動態性能好。
2、工作臺固定不動,加工動態性能不受工件重量的影響(定梁龍門工件重量會使加工動態性能產生波動)。
3、與定梁龍門相比由于運動部分是相對較輕的橫梁、橫拖板、滑枕部分,ⅩNY采用直線滾柱滾動導軌,承載大,摩擦系數小,因而具有很好的動態響應特性,適于高速加工。
4、雙驅同步技術,重心驅動,使機床的性能得到進一步提升。
5、防水性能好,運動部件都在墻體上,占地面積只有相同規格的定梁龍門機床的3/5左右。
Bridge type structure, workpiece fixed on unmovable table, all the processings are realized by tool motions.
Small motion inertia improves dynamic performance & processing speed ＆ enables high stability in large stroke, so it is the best structure for large ＆ high speed machining.
Structural advantages：
1. Heavy load(about 2-3times as gantry machines with fixed crossrail)& good dynamic performance.
2.Unmovable table enables the processing dynamic performance not be influenced by workpiece weight.
3. Linear roller guides with heavy load and little friction coefficient for movable parts like crossrail/cross slide/ram enables good dynamic response character for high speed processing.
4. Dual drive synchronizat on technology ＆ DCG(Driven by Center of Gravity) improves the performance of the machine.
5. All the movable parts on the wall enables good waterproof performance, the floor area is about 3/5 of gantry machines with same specifications.

LS系列 橋式龍門加工中心技術參數：

LS系列 橋式龍門加工中心產品展示：