EDHM13T缸體伺服珩磨機
EDHM13T Cylinder servo honing machine

■機床主體采用高強度鑄鐵鑄件，鑄件經過二次時效處理

■高剛性高精度直線導軌和精密滾珠絲杠，確保機床運動高精度及精度穩定性。

■雙軸結構，由伺服電機控制兩軸間隔方便調整。

■主軸旋轉、主軸往復、漲縮進給均采用伺服電機控制，保證位置、速度、力矩的精確控制。

■可加工精準的網紋，可滿足特殊的珩磨要求，如盲孔珩磨、大夾角網紋珩磨。

■根據設定角度及主軸轉速來控制主軸往復速度，可實現精準的網紋加工。

■伺服電機加滾珠絲杠副的進給方式，可以精確地實現微量級進給，輕松控制工件尺寸達到微米級

■機床采用自動上下料裝置，降低勞動強度

■ Machine body adopts high strength cast iron castings, casting two times after aging treatment.

■ High rigidity and  high precision linear slide guide and precision ball screw, ensure high precision machine tool motion ａnd the precision stability

■ Biaxial structure, consisting of a two-axis servo motor control convenient interval adjustment.

■ The rotation of the spindle, reciprocating, collapsible feeding adopts servo motor control, ensure the

precise control of position, speed, torque.

■ Processable accurate textured, honed to meet the special requirements, such as blind hole honing, honing textured large angle.

■ According to the set angle and spindle speed to control the stroke speed, enabling precise texture processing. ■ Feed servo motor and ball screw, can accurately realize micro feeding, easy control of workpiece dimension

achieve micron level

■ The machine adopts automatic loading and unloading device, reduce labor intensity.

■機床冷卻系統為循環冷卻，采用雙油箱設計，磁分式紙帶過濾機兩級過濾,并使用油冷機強制冷卻。
■ Machine tool cooling cycle cooling system, dual fuel tank design, magnetic tape filter two-stage filtration fraction, and an oil cooler forced cooling.

■高剛性高精度直線導軌和精密滾珠絲杠，確保機床運動高精度及穩定性
■ High rigidity precision linear guide and precision ball screws to ensure high accuracy and stability of the machine operation

■采用在高性能運動控制器基礎上設計開發的珩磨機控制系統，轉為珩磨加工定制的人機界面，使珩磨操作過程控制簡單化、自動化和可視化
■ Using high-performance motion controller based on the design and development of dedicated control system honing machine, honing into a customized user interface, making the process of honing operation control simplification, automation and visualization

■ 缸體加工珩磨頭
■ Honing the cylinder head machining

■主軸采用單獨配重系統，互不影響，大大提高了工作時的穩定性.
■ Spindle separate counterweight system, independently of each other, greatly improving the stability at work.

■集中潤滑系統間歇供油，延長滑動部件使用壽命。
■ Intermittent oil lubrication system, to extend the service life of the sliding member.

EDHM13T缸體伺服珩磨機規格參數