規格參數：
| 技術參數specifications | 單位Unit | J21S-25 | J21S-63 | J23-16 | JC23-50 | JC23-63 | JC23-80 |
| 公稱力nominal capacity | Kn | 250 | 630 | 160 | 500 | 630 | 800 |
| 公稱力行程nominl priessure stroke | mm | 6 | 4 | 5 | 8.5 | 8.5 | 8.5 |
| 滑塊行程stroke of slide | mm | 80 | 80 | 55/70 | 180 | 120 | 120 |
| 滑塊行程次數strokes per minute | min | 100 | 50 | 120 | 50 | 50 | 50 |
| 大裝模高度max.die.height | mm | 180 | 300 | 180/220 | 240 | 270 | 270 |
| 裝模高度調節器節量die height adjustment | mm | 45 | 50 | 45 | 80 | 80 | 80 |
| 滑塊中心到機身距離distance between center of slide and frame | mm | 500 | 600 | 160/250 | 260 | 260 | 260 |
| 墊板厚度Thickness of bolster | mm | 50 | 80 | 40/50 | 90 | 90 | 90 |
| 立柱間距distance between columns | mm | 250 | 380 | 220 | 350 | 350 | 350 |
| 工作臺尺寸(前后*左右)bolster sizes(FB*LR) | mm | 400×600 | 470×750 | 300×450/400×600 | 480×710 | 480×710 | 480×800 |
| 工作臺孔尺寸（孔徑）hole dimensions in bed(dia) | mm | φ160 | φ180 | φ210 | φ250 | φ250 | φ250 |
| 滑塊底面尺寸（前后*左右）bottom size of slide(FB*LR) | mm | 180×200 | 270×360 | 180×200 | 272×320 | 272×320 | 272×320 |
| 模柄孔尺寸（直徑*深度）size of the handle hole (dia.*depth) | mm | (φ38) φ40×60 | φ50×70 | (φ38) φ40×60 | φ50×70 | φ50×70 | φ60×70 |
| 主電機功率main motot power | kw | 3 | 5.5 | 1.5 | 5.5 | 5.5 | 7.5 |
| 壓力機外形尺寸(前后*左右)overall dimension(FB*LR) | mm | 1600×1100 | 1850×1180 | 1150×834/1150×910 | 1810×1350 | 1850×1290 | 1850×1350 |
| 壓力機高度height above floor | mm | 2180 | 2480 | 1910/2030 | 2740 | 2660 | 2740 |
| 機身大可傾斜角度max.angle ofinclination | Deg | - | - | 35° | 30° | 30° | 30° |
| 壓力機整機重量total weight | kg | 2300 | 4850 | 1150/1350 | 4000 | 4490 | 4780 |
注：因本公司時時在求進步，規格、數據、圖片如有改變，將不另行通知！
