一、 液壓擺式剪板機外形圖
調整刃口間隙迅速方便，機器設有前后擋料，后檔料采用機械傳動，轉速顯示數值，并能手動微調。前檔料采用標尺計數，擋塊定位。上刀架的行程可以調節(行程開關撞塊)，以提高剪切狹板料的效率。計數剪切件數，安裝防護欄，保證了操作的安全。
二、剪板機的基本參數
| 序號 | 名 稱 | 數 值 | 單 位 | 備 注 |
| 1 | 可 剪 板 厚 | 6 | mm | |
| 2 | 可 剪 板 寬 | 6000 | mm | |
| 3 | 被剪板料強度 | 450 | N/mm2 | |
| 4 | 剪 切 角 | 1°30′ | | |
| 5 | 行 程 次 數 | 4 | min-1 | |
| 6 | 刀 片 長 度 | 6150 | mm | |
| 7 | 主 電 機 | 7.5 | KW | B5 |
一、Hydraulic pendulum shearing machine contour figure
This machine adopts steel welding structure, hydraulic transmission, nitrogen return VAT return, work stable and reliable, the machine structure is reasonable, reliable and convenient operation and maintenance.
Adjust the blade clearance convenient quickly, before and after the machine is equipped with blocking material, after the file material adopts mechanical transmission, speed display value, and can be manual fine-tuning. Front rise is expected to adopt counting scale, block is positioned. Rest on the trip can adjust (travel switch collision block), in order to improve the efficiency of narrow sheet metal shear. Count quantity of shearing, installation guardrail, ensure the safety of the operation.
二、Parameters
| ITEM | | parameter | Unit | others |
| 1 | cut thickness capacity | 6 | mm | |
| 2 | cut width | 6000 | mm | |
| 3 | Plate Strength | 450 | N/mm2 | |
| 4 | corner cut | 1°30′ | | |
| 5 | Number of trip time | 4 | min-1 | |
| 6 | Long knife slices of degrees | 6150 | mm | |
| 7 | Main electric | 7.5 | KW | B5 |
