| 型號 | Model | UNIT | FC-65NCL / 65NC |
|---|---|---|---|
| 加工能力 | Capacity | ||
| 大旋徑 | Max.swing | ∅ mm | |
| 大加工直徑 | Max.turning diameter | ∅ mm | 50 |
| 大加工長度 | Max.turning length | mm | 100 |
| 兩心間距離 | Distance between centers | mm | 200 |
| 主軸 | Spindle | ||
| 高轉速 | Max.speed | rpm | 3000 / 500 |
| 主軸鼻端 | Spindle nose | A2-6 | |
| 主軸孔徑 | Spindle bore | ∅ mm | 65 |
| 棒材通孔 | Bar capacity | ∅ mm | 45 / 50 |
| 進給速度 | Feedrate | ||
| X,Z軸 | X/Z axis rapid traverse | M/min | 12 |
| 行程 | Stroke | ||
| X 軸行程 | X axis stroke | mm | 60 |
| Z 軸行程 | Z axis stroke | mm | 120 |
| 刀塔 | Turret | ||
| 刀塔數 | No. of turret | unit | - |
| 刀塔型式 | Turret type | servo | - |
| 外徑* | O.D. tool shank | ? mm | - |
| 內徑* | I.D. tool shank | ∅ mm | - |
| 切角刀盤 | Turret | ||
| 刀盤型式 | Polygon cutter type | FASTCUT | |
| *尺寸 | Tool size | ? mm | 16 x 16 |
| 馬達 | Motors | ||
| 主軸馬達 | Spindle motor | KW | 7.5 / 4.4 |
| X 軸馬達 | Servo motor, X axis | KW | 1 / 0.6 |
| Z 軸馬達 | Servo motor, Z axis | KW | 1 / 0.6 |
| 油壓幫浦 | Hydraulic pump | HP | 2 / 1 |
| 潤滑油幫浦 | Lubrication pump | W | 25 / 6 |
| 切削液馬達 | Coolant pump | KW | 0.2 |
| 機械尺寸 | Machine size | ||
| 長度 | Length | mm | 2970 / 1800 |
| 寬度 | Width | mm | 1800 / 1740 |
| 高度 | Height | mm | 1930 / 1600 |
| 淨重 | Net weight | kgs | 3500 / 2500 |
| 毛重 | Gross weight | kgs | 4000 / 3000 |
- 規格若經修改，恕不另行通知。
標準配備/Standard
| FC-65NCL | FC-65NC | ||
|---|---|---|---|
| 全罩外套 | Full guard | ◎ | ◎ |
| 冷卻系統 | Coolant system | ◎ | ◎ |
| 電控冷氣機 | Air conditioner | ◎ | ◎ |
| 操作面板 | Operator panel | ◎ | ◎ |
| 工具箱 | Tools for set up | ◎ | ◎ |
| 氣/油壓系統 | Pneumatic / Hyd. Systerr | ◎ | ◎ |
| 警示燈 | Tower light | ◎ | ◎ |
| 照明燈 | Work light | ◎ | ◎ |
| 排屑機 | Chip conveyor | ◎ | - |
| 鐵屑車 | Chip buket | ◎ | ◎ |
| 車刀頭 | Cutter head | ◎ | ◎ |
| 強力油壓夾 | Hydraulic power chunk | ◎ | ◎ |
選購配備/Optional
| FC-65NCL | FC-65NC | ||
|---|---|---|---|
| 夾頭 | Chuck | ◎ | ◎ |
| 夾具 | Collet | ◎ | ◎ |
| 控制器 | -FANUC -PC BASED | ◎ | ◎ |
| 尾座 | Tailstock | ◎ | ◎ |
| 動力刀塔 | Power milling | - | - |
| 自動送料系統 | Auto load & unload system | ◎ | ◎ |
