1.Radial clamp and axial pull down at the same time,keep the workpiece attachine close to the base surface of the chuck,Almost no workpiece uplifting displacement.
2. It can go with Air-tight pressure detect to inspect the axial position, it's suitable for high precision length machining work.
3. This chuck is Pin arbor pull-down mechanism, the chuck body is heat-treated and fine boring, the clamping precision and durableness is very good, it's suitable for heavy duty machining.

尺寸單位/Size Unit:mm

規格 Spec 型號 Model	楔心行程 Plunger stroke (mm)	爪行程直徑 Jaw stroke (Dia) (mm)	大夾持直徑 Max clamping dia (mm)	小夾持直徑 Min clamping dia (mm)	容許油壓缸推力 Max.D.B.Pull KN(kgf)
2AT-04A4	10	5.2	48	16	8.1(830)
2AT-06A5	15	7.8	60	22	16.7(1700)
2AT-08A5	20	10.3	90	32	23.7(2420)
2AT-08A6	20	10.3	90	32	23.7(2420)
2AT-10A6	20	10.3	120	45	34.3(3500)
2AT-10A8	20	10.3	120	45	34.3(3500)

規格 Spec 型號 Model	大夾持力 Max clamping force KN(kgf)	高轉速 Max RPM	慣性矩 I kg*m2	重量 Weight kg	適合油壓缸 Matched cylinders	大使用壓力 Max.pressure Mpa(kgf/cm2)
2AT-04A4	25.0(2550)	6000	0.02	7.1	SLA-75/S-80	2.3(23)
2AT-06A5	52.4(5350)	6000	0.05	13.8	SLA-100/S-100	2.4(24)
2AT-08A5	74.5(7600)	5000	0.14	25.9	SLA-100/S-100	3.4(34)
2AT-08A6	74.5(7600)	5000	0.14	24	SLA-100/S-100	3.4(34)
2AT-10A6	107.8(11100)	4000	0.36	50	SLA-125/S-125	3.2(32)
2AT-10A8	107.8(11100)	4000	0.36	48.5	SLA-125/S-125	3.2(32)

規格 Spec 型號 Model	A	B	B1	C(H6)	D	D1	D2	E	E1	F	G max	G min	H
2AT-04A4	135	70	100	110	82.6	63.51	96	4	15	30	29	19	32
2AT-06A5	168	88	128	140	104.8	82.56	116	5	15	35	39	24	32
2AT-08A5	210	100	145	170	133.4	82.56	104.8	5	23	45	44	24	38
2AT-08A6	210	100	145	170	133.4	106.38	150	5	17	45	44	24	38
2AT-10A6	254	110	160	220	171.4	106.38	133.4	5	25	55	44	24	38
2AT-10A8	254	110	160	220	171.4	139.72	190	5	18	55	44	24	38

規格 Spec 型號 Model	J1	L1	L2 min	M1	M2	M3(Ad.)	M4	M5	N	P min	S	T	X
2AT-04A4	11	13	±5	M14	4-M10	4-M6	4-M5	2-M10	45	8	28	60	40
2AT-06A5	13	16	±7.5	M16	4-M10	4-M6	4-M5	2-M12	50	10	35	72	50
2AT-08A5	17	18	±10	M20	4-M12	4-M10	4-M6	2-M12	63	12.5	40	85	60
2AT-08A6	17	18	±10	M20	4-M12	4-M6	4-M6	2-M12	63	12.5	40	85	60
2AT-10A6	17	20	±10	M20	4-M16	4-M12	4-M6	2-M14	74	15	50	100	70
2AT-10A8	17	20	±10	M20	4-M16	4-M8	4-M6	2-M14	74	15	50	100	70