品牌/Brand：NTH

采用斜柱后拉式結構，精度高，夾緊力大。

卡盤工作時，由斜柱的后拉將工件拉向定位面再進行夾緊，從而保證了徑向尺寸和軸向尺寸的精度。

本卡盤適合于夾持異型工件，尤其是對垂直度和平行度有要求的工件。

注：此型卡盤祇能做外徑夾持，夾持尺寸變換時，須更換軟卡爪。

It‵s adopted the structure of slanting post with pulling back type.high precision,strong clamping force.

The slanting post of the chuck pull the workpiece back to position place,and then clamping it,therefore,the chuck can ensure the accuracy of radial size and axial size.

This chuck is applicable for clamping the special shape workpiece.especially,itˊs applicable for the workpiece which need high precision requirements on squareness and parallelism.

Re:This chuck is only for clamping out diameter,the soft jaws need chanqing when the clamping size is changed.

尺寸單位/Size unit: mm

規格 Spec 型號 Model	楔心行程 Plunger stroke mm	爪行程直徑 Jaw stroke Dia. mm	容許油壓缸推力 Max.D.B.Pull kgf	大夾持力 Max clamping force kgf
2SL-05 A4	12	6.2	7.9(800)	13.4(1400)
2SL-06 A5	20	10.3	11.8(1200)	20.6(2100)
2SL-08 A5	20	10.3	17.6(1800)	31.4(3200)
2SL-08 A6	20	10.3	17.6(1800)	31.4(3200)

規格 Spec 型號 Model	高轉速 Max RPM	夾持范圍 Gripping range mm	慣性矩 I kg*m2	重量 Weight Kg
2SL-05 A4	4000	6-80	0.06	7
2SL-06 A5	3500	15-100	0.19	13.5
2SL-08 A5	3000	40-160	0.57	24.5
2SL-08 A6	3000	40-160	0.57	25.5

規格 Spec 型號 Model	A	B	C(H6)	D	D1	E	E1	F	G max	G min	H	J	K	L1	L2 Min
2SL-05 A4	130	70	110	82.6	63.51	5	15	20	20	8	30	28	100	12	7
2SL-06 A5	165	80	140	104.8	82.56	5	15	30	30	10	35	32	132	13	8
2SL-08 A5	210	85	170	133.4	82.56	5	17	40	30	10	40	37	160	17	9
2SL-08 A6	210	85	170	133.4	106.38	5	23	40	30	10	40	37	160	17	9

規格 Spec 型號 Model	M1	M2	M3	M4	M5	M6	N	P	R	S	T	X
2SL-05 A4	M12	4-M10	4-M16	4-M10	4-M4	4-M8	60	16	30	30	40	35
2SL-06 A5	M16	6-M10	4-M16	4-M10	4-M5	4-M10	73	23	35	35	48	45
2SL-08 A5	M20	6-M12	4-M16	4-M10	4-M6	4-M12	82	26	40	40	60	55
2SL-08 A6	M20	6-M12	4-M16	4-M10	4-M6	4-M12	82	26	40	40	60	55

保留技術更改的權利,恕不另行通知 Subject to technology changes without prior information
非標需求可定做 Non-standard requirements can be made