小型立式加工中心
整體結構采用高韌性、高鑄鐵制造; 并經過高效能的退火處理，有效將材料-內應力消除，確保精度穩定及持久性。
The overall framework is made of high toughness and high grade casting iron. High efficient annealing treatments relieves internal stress to ensure the lasting best rigidity and high precision
立柱設計以大“人”字型大跨距，具有高剛性及高穩定性，與結實、平穩大鑄件床身底座相連更能保證加工件的精確度及精準度。
The long span Y type column design leads high rigidity and high stability. Assembled with solid and stable large casting bed base can guarantee the workpiece’s accuracy.
三軸采用P3級精密滾珠絲杠，配合雙螺母墊片預緊，預先消除背隙，實現高穩定性之定位精度與重復定位。
Using P3 class precision ball screw on 3 axes with double nuts and washers pre-loading to pre-eliminate back lash achieves position accuracy and repeatability accuracy with high stability
機床三軸均安裝高精度滾動直線導軌副，保證了加工的高精度，同時增加了快進速度。
3 axes assembled with high precision linear ball guide ways shaft ensure high machining precision and rapid feeding speed.
三軸進給驅動采用交流伺服電機與絲杠直聯，傳動平穩、無背隙。同時具有良好的剛性和減震性能，*改善了傳動系統的動態剛性。
The ball screw connected with AC servo motor directly on 3 axes feed driving system. Running smoothly without back lash. Also having good rigidity and shock absorption performance to improve the e dynamic rigidity of driving system greatly.
精密高速主軸單元與交流伺服電機通過同步帶相聯，噪音低、振動小、發熱量低。可進行銑削、鉆孔、擴孔、鏜孔、鉸削、攻絲等加工。
The high speed precision spindle connected with AC servo motor by synchronous belt. Low noise, low vibration and low heat. The machine can be used for milling, drilling, reaming, boring, reaming and tapping and other machining processing.
小型立式加工中心
