1756-ENET/ABPLC模塊
對RS-422與RS-485總線網絡一般要使用終接電阻進行匹配。但在短距離與低速率下可以不用考慮終端匹配。那么在什么情況下不用考慮匹配呢?理論上,在每個接收數據信號的中點進行采樣時,只要反射信號在開始采樣時衰減到足夠低就可以不考慮匹配。但這在實際上難以掌握,美國MAXIM公司有篇文章提到一條經驗性的原則可以用來判斷在什么樣的數據速率和電纜長度時需要進行匹配:當信號的轉換時間(上升或下降時間)超過電信號沿總線單向傳輸所需時間的3倍以上時就可以不加匹配。例如具有限斜率特性的RS-485接口MAX483輸出信號的上升或下降時間小為250ns,典型雙絞線上的信號傳輸速率約為0.2m/ns(24AWG PVC電纜),
1756-ENET/ABPLC模塊
1756
MFR. PART NUMBER DESCRIPTION
1756-A10 10 SLOT CONTROLLOGIX CHASSIS
1756-A13 13 SLOT CONTROLLOGIC CHASSIS
1756-A17 CHASSIS 17 SLOT CONTROLLOGIX
1756-A4 4 SLOT CONTROLLOGIX CHASIS
1756-A7 7 SLOT CONTROLLOGIX CHASSIS
1756-BA1 LOGIX5000 BATTERY ASSEMBLY
1756-CFM 2 CHANNEL /2 OUT CONFIGURABLE FLOWMETER
1756-CNB CONTROLNET BRIDGE MODULE
1756-CNBR CONTROLNET REDUNDANT BRIDGE MODULE
1756-CP3 LOGIX5000 RS232 PROGRAMMER CABLE
1756-DHRIO 2 CHANNEL DH+ AND/OR RIO SCANNER
1756-DNB DEVICE NET BRIDGE/SCANNER MODULE
1756-DPALEN CONTROLLOGIC SYSTEM DOCUMENTATION SET PRINTED
1756-ENET ETHERNET/IP BRIDGE MODULE
1756-GTWY CONTROLLOGIC GATEWAY CONFIGURATION SOFTWARE
1756-GTWYR SUPT REINSTATEMENT CONTRACT FOR 1756GTWY
1756-GTWYS SUPT RENEWAL CONTRACT FOR 1756GTWY
1756-HSC 2 CHANNEL /4 OUTPUT HIGH SPEED COUNTER
1756-IA16 79-132 VAC INPUT 16PTS
1756-IA16I 79-132 VAC ISOLATED INPUT 16PTS
1756-IA8D VAC DIAGNOSTIC INPUT 8PTS
1756-IB16 VDC INPUT 16PTS
1756-IB16D VDC DIAGNOSTIC INPUT
1756-IB16I VDC ISLOTED INPUT 16PTS