數控平面磨床
產品介紹：
全系鞍座移動式數控平面磨床，可以選配二軸（YZ）或者三軸（XYZ）數控。全數字控制系統可選擇新代、西門子或者法那科等品牌。
2-axis(YZ) or 3-axis(XYZ) CNC control can be choosed for saddle moving grinder. SYNTEC,SIEMENS, FANUC controller are recommended.
精心設計的全封閉護罩，配有開關。不單賦予機器宜人外觀，更提供操作空間。
Elaborately-designed closed safe guard with safety-switch,not only have good appearance but also safety operating field.
高精度、免維護主軸單元，支承采用超精密角接觸軸承，V3低振動馬達驅動。
Precision grind spindle with preload high precision angular ball bearing and drive by V3motor,runs in maintenance-free, low vibration, and no noise.
CNC-2:二軸數控，YZ軸采用滾珠絲桿、伺服電機驅動，X軸采用液壓驅動。
CNC-3:三軸數控，XYZ軸采用滾珠絲桿、伺服電機驅動。
CNC-2 model: YZ axis numerical control and linkaged, drove by AC servo motor and ball screw. X axis drove by hydraulic.
CNC-3 model: XYZ axis numerical control and linkaged, drove by AC servo motor and ball screw.
產品參數：
主要參數（Specifications） |
|
|
|
|
| |||
項目Item/機型 Model |
|
| FSG-2550CNC | FSG-30100CNC | FSG-40100CNC |
|
|
|
工作臺尺寸 | Table size | mm | 250*500 | 305*1020 | 406*1020 |
|
|
|
電磁吸盤尺寸 | Magnetic chuck size | mm | 250*500 | 300*1000 | 400*1000 |
|
|
|
主軸中心線到臺面距離 | Max.distance from spindle center to table | mm | 450 | 580 | 580 |
|
|
|
工作臺大載重（含吸盤） | Max loading capacity（include chuck） | Kg | 200 | 400 | 600 |
|
|
|
X軸運動（工作臺左右移動）X axis feed |
|
|
|
|
| |||
快速移動 | Feed speed | mm/min | 0.02~18/CNC-3(5~25/CNC-2) | 0.02~18/CNC-3(5~25/CNC-2) | 0.02~18/CNC-3(5~25/CNC-2) |
|
|
|
小進給量 Micro feed rate mm 0.005/CNC-3(--/CNC-2) | 0.005/CNC-3(--/CNC-2) | 0.005/CNC-3(--/CNC-2) |
|
|
| |||
Y軸運動（工作臺前后移動） | Y axis feed |
|
|
|
|
|
|
|
快速移動 | Feed speed | mm/min | 0.1~1000/CNC-3 | 0.1~1000/CNC-3 | 0.1~1000/CNC-3 |
|
|
|
小進給量 Micro feed rate mm 0.005/CNC-3 | 0.005/CNC-3 | 0.005/CNC-3 |
|
|
| |||
Z軸運動 | Z axis feed |
|
|
|
|
|
|
|
快速移動 | Feed speed | mm/min | 0.1~1000 | 0.1~1000 | 0.1~1000 |
|
|
|
小進給量 | Micro feed rate | mm | 0.005 | 0.005 | 0.005 |
|
|
|
主軸轉速 | Spindle Rotating speed | r/min | 2850/3450 | 1450(50HZ)/1750(60HZ) |
|
|
| |
砂輪尺寸 | Grind wheel size | mm | 200*20*31.75 | 350*40*127 | 350*40*127 |
|
|
|
主軸電機功率 | Spindle motor power | kw | 2.2 | 4 | 4 |
|
|
|
占地面積（長×寬×高） | Floor space(L*W*H) | mm | 2800*2000 | 5000*2400 | 5000*2400 |
|
|
|
毛重（約） | Gross weight | kg | 1900 | 3500 | 4400 |
|
|
|
包裝尺寸 | Packing size(L*W*H) | cm | 220*200*215 | 375*225*225 | 375*225*225 | |||
