1000x3000立柱移動式程控重型平面磨床
產品介紹：
1000x3000立柱移動式程控重型平面磨床為臥軸矩臺立柱移動式平在磨床。是集機、電、液等*技術為一體的平面磨削設備。通過在控制面板上進行簡單設定，即可進行自動磨削。
The machine is the column-moving grinding machine with horizontal spindle and rectangular worktable. The machine is a very efficient machine consisted by the technologies of mechanical, electrical and hydraulic. The machine can grind the workpiece automatically by do the simple settings through the control panel.
工作臺左右移動（X軸）:工作臺左右移動采用液壓驅動，通床身前端的調速手柄進行無級調速；通過電液閥控制換向。
The worktable longitudinal movement (X axis): the machine's longitudinal movement is controlled by the hydraulic system, the speed of movement can be adjusted by the handle locates in front of the machine. The movement direction is controlled by the electrohydraulic valve.
立柱前后移動（Z軸）：立柱前后移動由伺服電機通過齒形帶和絲桿驅動。可以實現點動、邊續無級運動、自動間歇進給。配有電子手輪取代傳統機械手輪，操作輕松簡便。
The column cross movement (Z axis): the column movement is by the timing belt and leadscrew driven by the servo motor. So that the machine can make continuous feed and auto interment feed. The machine adopts the electro handwheel instead of the normal mechanical handwheel to make the operation easily.
磨頭上下運動（Y軸）：磨頭上下運動由伺服電機帶動齒形帶和絲桿驅動，配有重垂式平衡裝置，有效降低絲桿負載。可以實現點動、邊續運動、自動進給。手動進給通過電子手輪控制。
The vertical movement of wheel head (Y axis): the vertical movement of wheel head is driven by the servo motor and leader screw, and equips with the balance-weight device which reduces the leader screw loading. It can realize JOG feed, continuous feed and auto interment feed. The feed manually model is controlled by the electric hand wheel.
液壓動力由獨立的液壓站提供。液壓站配有油溫控制裝置。隔絕熱源與振動源，為精密磨削提供強勁驅動力。
The hydraulic power is supported by the hydraulic station. The hydraulic station equips with the oil temperature controller. The hydraulic station can provide the power for the high precision grinding and keep the heat and shake form the machine.
機床配有完善的電氣聯鎖保護。
The machine equips the complete electro interlock protection.
產品參數：
主要參數（Specifications） | |||||
項目Item/機型 Model |
|
| FSG-100400ZNC | ||
工作范圍 Working area | |||||
工作臺尺寸 | Table size | mm | 1000*4000 | ||
大磨削尺寸 | Max.ground area | mm | 1000*4000 | ||
大磨削高度 | Max.ground height | mm | 670(830/1000加高型optional) | ||
電磁吸盤尺寸（特殊訂貨） | Magnetic chuck size(optional) | mm | 1000*1000*4 | ||
工作臺大載重 | Max loading capacity | Kg | 5000 | ||
各軸運動Three axis motion | |||||
工作臺縱向移動速度 | Speed of table move | m/min | 5~25 | ||
磨頭橫向運動 Cross motion | |||||
間歇進給量 | Intermittent feed rate | mm/t | 1~30 | ||
機動速度 | Rapid down speed | mm/min | 50~2000 | ||
電子手輪進給量 | Feed of MPG | mm/div | 0.005 | ||
磨頭垂直運動 Vertical motion | |||||
自動進給量 | Auto down feed rate | mm/t | 0.005~0.05 | ||
機動速度 | Rapid down speed | mm/min | 50~2000 | ||
電子手輪進給量 | Feed of MPG | mm/div | 0.005 | ||
砂輪 Grinding wheel | |||||
轉速 | Rotating speed | r/min | 960(50HZ)/1150(60HZ)選配1450 | ||
砂輪尺寸 | Grind wheel size | mm | 500*75*305（500*100*203） | ||
電機 Device capacity | |||||
主軸電機 | Spindle motor power | kw | 18.5/22 | ||
液壓油泵電機 | Oil pump motor | Kw | 15 | ||
垂直、橫向伺服電機 | Y/Z servo motor | kw | 3 | ||
總額定功率 | Total rated power | KVA | 41 | ||
占地面積（長×寬×高） | Floor space(L*W*H) | cm | 1000*430*260 | ||
毛重（約） | Gross weight | kg | 19500 | ||
