1. Dependable accuracy over the entire range of the gauge, not just at "calibration check" points.
2. Keypad-selectable English or metric units.
3. Continuous reading update detects soft coatings as probe tip "sinks" into them.
4. The DCF-900 includes the gauge and probe, a bare test plate, two precision calibration shims & instructions, all in a foam-fitted carrying case.
5. Calibration to NIST-Traceable standards is upon request.
6. Remote probe permits easy access for difficult, hard-to-reach places.
7. Longer lasting, driftless calibration... Set it and forget it for long periods of time and from job to job
8. Very reliable operation... Consistent, repeatable measurements
9. Excellent results with thin substrates... As thin as 0.005" (10 µm)
參數
Range: | 0.1-40.0 mils (0-999 µm) |
Resolution: | 0.1 mil (1 µm) |
Accuracy: | 0-10 mils: ±0.1 mil |
Probe: | Monopolar, magnetic induction, 0.4" (10 mm) dia., spring-loaded, with V-notched shell and 28" (70 cm) cable |
Battery/Life: | 9 V alkaline/approx. 6 months normal use, with auto shutoff after 90 seco of non-use. |
Dimension: | 5.7" x 3.1" x 1.5" |
Weight: | 9 oz. (250 g) |
Temperature Limits: | Material: 15 to 140° F (-10 to 60° C) |
Warranty: | One (1) year |
訂貨清單
The DCF-900 is supplied as a complete kit including gauge, ferrous zero plate, 2 plastic test shims and instruction manual in a foam fitted, hard plastic carrying case.
3174269615
sales@huntsort.com
